The advantages of silica gel are gradually being discovered by people, replacing many other materials in our daily lives. For the silicone product factory, it is very important to select the silicone material in time during the production process of the silicone plug. It will not fade, non-toxic, odorless, easy to clean, oil-resistant, soft, non-slip, and feel good when used at daily temperature. , Easy to use, will eventually be our unanimous pursuit of high-quality material life. The material of the silicone plug is mainly based on environmental protection advantages, material texture, and comfortable use. Therefore, it is used in some electronic products, daily necessities and small waterproof and dustproof home appliances, and its raw materials are combined with high-quality silica gel through the precipitation method. Fine-grained molecular silicone resin combined with white carbon black is mixed, the product has a good molecular chain, soft material, and comfortable to use!
Silicone rubber is a two-component room temperature vulcanized silicone rubber with high and low temperature resistance, good tensile and tear resistance, high strength, anti-agent pressure, and non-corrosion. The silicone plug has excellent electrical insulation properties, sealing properties and aging resistance, and can be used for a long time in the temperature range of -60~+200℃. Special types can reach a high temperature of 315 degrees.
Room temperature vulcanized silicone rubber is a one-component, low-viscosity, solvent-free room temperature curing silicone rubber.
The cured product is elastic, good in insulation and sealing, and resistant to high and low temperatures.
At the same time, it has acid and alkali resistance and will not swell in the acid copper plating bath.
Mainly used in the dry film process to break holes and mask holes, metal plastic spraying, electrophoretic coating and electroplating to block holes.
Prevent the penetration of paint and chemical liquids, and can be used repeatedly.
Silicone plug material: silicone
Customized shape and size, hardness and color according to customers
Silicone plugs are used in automobiles, electronics, electrical appliances, home appliances, machinery, daily necessities and aviation.
Spray masking
The equipment required for silicone production is as follows:
1. Material preparation requires one rubber mixing machine, one electronic scale, and one cutting machine.
Rubber mixing machine is used to add vulcanizing agents, color pastes and other additives to the raw materials. This is a process that cannot be omitted.
The cutting machine is used to cut the refined rubber to the size and weight required for molding. If you only make some miscellaneous pieces of silicone rubber, you can manually mark the rubber out, and then weigh the weight with a balance. To meet the molding needs, but to make silicone buttons, especially those with higher load requirements or more colors, it is recommended to buy a cutting machine to cut the rubber material, which is not only accurate, but also highly efficient.
2. For molding, you need a sandblasting machine, a plate vulcanizing machine (hydraulic press), and an air compressor. If you want to produce conductive adhesive keys, you must also buy a vacuum pump.
Sandblasting machine, after a period of production, some dirt will accumulate on the surface of the molding mold, which will affect the production. At this time, the mold needs to be cleaned, and the sandblasting machine is a necessary machine for cleaning the mold.
Plate vulcanizing machine (hydraulic press), this is the necessary equipment for the molding of silicone products. The pressure, mold temperature, vulcanization time and other conditions required for molding are provided by this equipment.
Air compressor, the function is to compress air and store high pressure gas, its function is to assist demoulding.
For the vacuum pump, if it is to produce conductive rubber keys, then conductive carbon particles may need to be placed on the mold. At this time, a carbon particle jig is needed. First, use the suction provided by the vacuum pump to adsorb hundreds of carbon particles on the carbon particles. The jig is then placed into the forming mold at one time. The operation is convenient and simple, and the efficiency is high.
4.總括而言，犀利士是有效的壯陽藥物，可以治療陽痿問題。然而，使用時應該注意劑量和頻率，以避免不必要的副作用和病情惡化。最重要的是，與醫生保持良好的溝通，共同制定合適的治療計劃。
樂威壯的成分可能引起副作用，如頭痛、噁心、肌肉痠痛等。如果您在服用樂威壯期間出現任何不適症狀，應立即停止使用並向醫生諮詢。不要擅自增加服用量，以免對身體造成不利影響。